The coping machine KF-mini is a compact and efficient work station for the tear free end scribing of glazing bars which are already profiled on the long side.

Stegherr Konterfräse KF-mini


The Coping Center type KF-1 features two vertical spindles that rotate in opposite directions. The working cycle is fully automatic on the stationary workpiece, held in place by pneumatic clamping.
The machine is available with additional units for drilling dowel holes or milling for connection elements, such as clips. As an optional the machine can be equipped with a dowelling station which can drill, inject glue and drive in the dowels.

Stegherr Konterfräse KF-1


Due to its modular design system, the Stegherr Coping Center KF can be produced exactly to customer’s specification. Some of the optionals available for this machine are drilling units, height adjustable milling spindles, servo controlled drive, automatic tool changer, cross cut saw, glue injection and dowel driving.

Stegherr Konterfräse KF

Coping Center for glazing bars SKF

With its two or (optional) four counter rotating milling spindles, the Coping Center SKF can cope SDL bars without any tear outs to identical or different profiles in one single passage.

Stegherr Konterfräse SKF

Coping Machine for assembled frames RKF

The Stegherr RKF machine mills the profile of the sash bar from the bottom upwards into the frame

Stegherr Konterfräse RKF

Copying and Milling Machine KF-S

The Stegherr KF-S is a special machine for the fully automatic milling of outdoor wood elements such as fence rails and timber planters.

Stegherr Konterfräse KF-S